Recent Asked Civil Engineering MCQs 2

 

Recent Asked Civil Engineering MCQs 2

Q. 1 Which principle of surveying is useful to prevent accumulation of errors? 

Ans A. Whole to part 
B. Part to whole 
C. Right to left 
D. Left to right

Q.2 If a closed traverse consists of five sides, then the summation of all the included angles must be ______.

Ans A. 540° 

B. 720° 

C. 900° 

D. 360°

Q.3 Which of the following statements is related to the water carriage system of sanitation?

A. No chance of putrification 

B. Large area of land is required for disposal of untreated sewage 

C. Lot of foul smell 

D. Risk of spread of an epidemic

Q.4 Read the given statements and select the most appropriate option regarding refractoriness. 

Statement 1: Refractoriness denotes the ability of a material to withstand prolonged action of high temperature without melting or losing shape. 

Statement 2: Materials resisting prolonged temperatures of 1580°C or more are known as refractory.

A. Both the statements are true 

B. Statement 1 is true, but statement 2 is false 

C. Both the statements are false 

D. Statement 1 is false, but statement 2 is true

Q.5 The phenomena of “Bulking of sand” would be most pronounced in: 

A. coarse sand 

B. medium sand 

C. sandy gravel 

D. fine sand

Q.6 The density of the liquid ______ during most ordinary conditions of temperature, whereas the density of the gas ______ as the temperature changes. 

Ans A. increases; decreases 

B. is constant; changes 

C. changes; remains constant 

D. decreases; increases

Q.7 The RL of point B, which is on the ceiling, is 105.00 m and the foresight reading at B is 2.00 m. If the back sight reading at point A is 3.0 m at the floor, what is the RL of A?

Ans A. 99.71 m 

B. 94.80 m 

C. 100.00 m 

D. 100.29 m

Q.8 If the magnetic bearing of the Sun at a place at noon in the Southern Hemisphere is 180° , the magnetic declination at that place is:

Ans A. 0° 

B. 23° S 

C. 13° E 

D. 77° N

Q.9 Soil deposits, which are formed by landslides are called: 

Ans A. colluvium 

B. alluvial soils 

C. residual soils 

D. peats

Q.10 The defect observed as spongy swollen mass over the surface of burned bricks that is caused due to the presence of excess carbonaceous matter and Sulphur in brick-clay is: 

Ans A. chuffs 

B. spots 

C. black core 

D. bloating

Q.11 Which survey line gives the details of offset? 

Ans A. Base line 

B. Chain line 

C. Tie line 

D. Main survey line

Q.12 The function of a reflux valve in a water distribution system is: 

Ans A. to maintain continuous flow of water 

B. to prevent the blockage of water in a pipeline 

C. to allow water to flow in one direction only 

D. to relieve high pressure of water in a pipeline

Q.13 Vorticity is ______ times the value of rotation. 

Ans A. 20 

B. 2 

C. 4 

D. 15.5

Q.14 In a water distribution system, hydrants are provided for: 

Ans A. storing purpose 

B. fire extinguishing purpose 

C. sampling purpose 

D. drinking purpose

Q.15 Most probable number is the unit to measure the: 

Ans A. hardness of water 

B. smell of water 

C. taste of water 

D. coliform bacterial density in water

Q.16 Which of the following factors does NOT significantly affect the compaction of soil? 

Ans A. Moisture content of soil 

B. Method of compaction 

C. Temperature 

D. Type of soil

Q.17 The type of levelling in which the level is set up at several suitable positions and staff readings are taken till the last sighted point is known as ______. 

Ans A. fly levelling 

B. differential levelling 

C. simple levelling 

D. profile levelling

Q.18 The pressure which is measured by using instrumentation, considering the atmosphere pressure as datum, is termed as: 

Ans A. absolute pressure 

B. vacuum pressure 

C. gauge pressure 

D. maximum pressure

Q.19 If one of the angles in a triangle measures less than 30° , is it a well-defined triangle? 

Ans A. It should always be 60° 

B. Yes 

C. No 

D. A triangle is always well-defined for any angle

Q.20 Weight density of a fluid is the ratio of ______. 

Ans A. specific volume to density 

B. specific gravity to density 

C. mass of the fluid to its volume 

D. weight of the fluid to its volume  

This Recent Asked Que is made up for daily practicing objective type questions both technical as well as non technical. In this Quizzes Questions are added from previous year question papers taken by (TCS, IBPS) Various States, Mahatransco, Mahapariksha PWD, Mahapariksha Town planning, Mahapariksha Soil and Water Conservation Department, WRD, Rajasthan JE, ITI Lecturer, SSC, RRB, BMC, GATE, ISRO, MPSC, UPSC, APPSC, Metro and also from objectives types books . I hope this is helpful for your upcoming Exams ✌.

All the best for your all upcoming Exams 👍💐💐💐

Answer Shown by quizzes is directly taken from response sheet please verify carefully

Please comment for any improvement